Gearbox for Extruder Machine

The gear is processed by carburizing, quenching and grinding.Gear accuracy gb10095-88, class 6.Hardened gear hardness HRC54~62.The front section of hollow output shaft is equipped with large thrust bearing, which can bear the axial thrust when the screw is working.The machine has the characteristics of small volume, high bearing capacity, smooth transmission, low noise and high efficiency.

Send InquiryChat Now
Product Details
twin screw extruder gearbox(002)

Gearbox for extruder machine is the pressure and shear force generated by screw rotation, which can make the material fully plasticized and evenly mixed, and then molded by the die.Therefore, it is sometimes possible to use an extruder to complete a series of processes such as mixing, plasticizing and molding at the same time for continuous production.


Product Introduction

The gear is processed by carburizing, quenching and grinding.Gear accuracy gb10095-88, class 6.Hardened gear hardness HRC54~62.The front section of hollow output shaft is equipped with large thrust bearing, which can bear the axial thrust when the screw is working.The machine has the characteristics of small volume, high bearing capacity, smooth transmission, low noise and high efficiency.


Products Specification

Power(kW)

5.5--200

Ratio

6.3--40

Output torque(kN.m)

Top to 42


Product feature and application

image003(001)image003(001)

Our products are suitable for various fields, especially in intelligent kitchen, medical equipment, industrial equipment, security equipment, office supplies, robots, model aircraft and other fields.product are sold all over the world, by the consistent praise of customers.


Product detail

image007(001)


Deliver-shipping and serving

image009_

We will start production within ten days of receipt of the confirmed order.We use wooden cases to ensure that the products are in good condition during sea or air transportation.


FAQ

1. How is the machine maintained without use?

If the machine is out of use for a long period of time, it must be run every 2~3 weeks.

2. What are the working temperature requirements?

Ambient humidity is less than 85℃。

3. What should we pay attention to before using

Check whether the reducer has been filled with lubricating oil before starting. When the ambient temperature is lower than 0 ℃, check whether the lubricating oil meets the starting requirements according to the operation manual.


Latest News

The reducer should be operated without load for 10 minutes before starting, so that the internal bearing and gear of the reducer can be fully lubricated before loading and using. If the reducer is used for the first time, it should be loaded step by step after no-load operation, and run for 2 hours with 20% of rated load each time, until the rated load enters normal operation without any abnormal phenomenon.

Hot Tags: gearbox for extruder machine, China, manufacturers, suppliers, factory, customized, price, 60 Kw Electric Motor SKF Bearing, High Temperature Heat Pump, Gearbox, Electric Motor For Conveyor Belt, 70 Mva Oil Transformer Substation, Electric Motor 75kw
Related Products
Inquiry
Back to top